Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 666

HiGig Offset: 320 Width: 1 DATA=0x00000000 MASK=0x00000001 SrcMac Offset: 89 Width: 48 DATA=0x00000000 08000100 MASK=0x0000ffff ffffffff action={act=DropCancel, param0=0(0), param1=0(0), param2=0(0), param3=0(0)} policer= statistics=NULL show hardware system-flow This command displays hardware system-flow information. C9000 Series Syntax Parameters show hardware system-flow {cp-switch | linecard slot-id port-set port number | pe pe-id stack-unit unit-number port-set port-pipe-id } counters cp-switch linecard slot-id pe peid Enter the keyword cp-switch to display the counters for control traffic on the control plane. Enter the linecard slot-id parameters to identify the line card on which you want to clear system-flow statistics. The range of slot IDs is from 0 to 11. Enter the keyword pe and the port extender (PE) ID to display the counters for a specified PE. The PE ID ranges is from 0 to 255. NOTE: The pe option is only visible when the extended bridge feature is enabled. stack-unit unitnumber port set port-pipe Enter the keyword stack-unit and unit number to display the counters for the specified stack-unit. The stack unit range is from 0 to 7. Enter the keyword port-set and port-pipe number. The port-set number is 0. Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 Description Introduced on the C9010. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Debugging and Diagnostics 666