Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1681

• hmac-sha1-96: Force ssh to use hmac-sha1-96 HMAC algorithm. • hmac-md5: Force ssh to use hmac-md5 HMAC algorithm. • hmac-md5-96: Force ssh to use hmac-md5-96 HMAC algorithm. • hmac-sha2-256 : Force ssh to use hmac-sha2-256 HMAC algorithm. -p port-number -v {1 | 2} (OPTIONAL) Enter the keyword -p then the port number. The range is from 1 to 65535. The default is 22. (OPTIONAL) Enter the keyword -v then the SSH version 1 or 2. The default is the version from the protocol negotiation. Defaults As shown in the Parameters section. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.10(0.0) 9.9(0.0) 9.5(0.1) Description Removed the support for hmac-sha2-256-96 algorithm. Introduced on the C9010. Added support for the following ciphers and HMAC alogorithms on the Z9000, S6000, S4820T, S4820T. • aes128-cbc • aes192-cbc • aes256-cbc • aes128-ctr • aes192-ctr • aes256-ctr • hmac-sha2-256 • hmac-sha2-256-96 9.4(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.12.0 8.3.7.0 7.6.1.0 7.5.1.0 6.1.1.0 Added support for VRF. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Added support for the -c and -m parameters on the S4810. Introduced on the S4810. Introduced on the S-Series. Added IPv6 support. Introduced on the C-Series. Introduced on the E-Series. Usage Information Dell Networking OS supports both inbound and outbound SSH sessions using IPv4 or IPv6 addressing. Inbound SSH supports accessing the system through the management interface as well as through a physical Layer 3 interface. Security 1681