Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 172

NOTE: While switching to a remote NFS file system, it is mandatory to specify the mount-point that indicates the working directory on the NFS file system. You cannot enter the root directory of the remote NFS file system. • usbflash: (USB Flash) or any sub-directory flash: Enter the internal directory name and the directory path. ([[flash://]directory _path]) usbflash: ([[usbflash://]direc tory_path]) Enter the USB flash directory name and the directory path. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.7(0.1) 9.7(0.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the C9010 and C1048P. Introduced on the S3048-ON and S4048-ON. Introduced on the S6000-ON. Added the nfsmount: parameters to support remote NFS file system. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Original command. Usage Information You can also use the cd {flash: directory name/path | usbflash directory name/path} command from a port extender (PE) console to change the working directory. Example Dell#cd flash://TRACE_LOG_DIR copy Copy one file to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip field). C9000 Series Syntax copy compressed-config source-filename destination-filename File Management 172