Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1753

show logging driverlog Display the driver log for the specified hardware component. C9000 Series Syntax show logging driverlog {cp | linecard slot-id | pe pe-id stack-unit unit number From a PE console, use the show logging driverlog stack-unit unit number to view the driver logging information for a specified stack-unit. Parameters cp linecard slot-id pe pe-id stack unitnumber Enter the keyword cp to display the driver log for the Control Processor on the switch. Enter the linecard slot-id parameters to specify the line-card ports for which you want to display the driver log. The range of line-card slot IDs is from 0 to 11. Enter the keyword pe and the port extender ID to display the driver log information for the specified port extender. Port extender ID range is from 0 to 255. Enter the keyword stack-unit and the unit number to display the driver log information for the specified stack-unit. Stack unit range is from 0 to 7. defaults none Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 Description Introduced on the C9010 and C1048P. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Usage Information This command displays internal software driver information, which may be useful during troubleshooting switch initialization errors. Examples Dell# show logging driverlog cp 0:Task(dlm): [ 6472921]EEPROM LIB ERR: decipherPpId:349 PPID ERROR: Mismatching VID and MFGID Simple Network Management Protocol (SNMP) and Syslog 1753