Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 777

Version 8.1.1.0 7.6.1.0 7.5.1.0 7.4.1.0 Description Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Modified for E-Series: Revised from 78 to 240 characters. Usage Information Important Points to Remember: • To use special characters as a part of the description string, you must enclose the whole string in double quotes. • Spaces between characters are not preserved after entering this command unless you enclose the entire description in quotation marks ("desc_text"). • Entering a text string after the description command overwrites any previous text string that you previously configured as the description. • The shutdown and description commands are the only commands that you can configure on an interface that is a member of a port-channel. • Use the show interfaces description command to display descriptions configured for each interface. Related Commands show interfaces - displays information about an interface. default interface Resets a physical interface to its factory-default settings. C9000 Series Syntax Parameters default interface interface slot/port-range interface slot/ port-range Enter one of the following interface types and port information to specify a single port or a range of ports. To specify a port range, you can enter a hyphenated range and/or individual port numbers separated with commas; for example, default interface tengigabitethernet 1/0-4,7,9-11. To enter any random number of ports, you can enter a comma-separated string of port numbers, for example default interface tengigabitethernet 1/0,1,9,11 • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. Defaults Not configured. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Interfaces 777