Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 370

Related Commands the peer. If the request is indeed negotiated (after executing the clear ip bgp soft in command), BGP sends a route-refresh request to the neighbor and receives all of the peer's updates. clear ip bgp - activates inbound policies without resetting the BGP TCP session. capture bgp-pdu neighbor Enable capture of an IPv4 BGP neighbor packet. C9000 Series Syntax capture bgp-pdu neighbor ipv4-address direction {both | rx | tx} To disable capture of the IPv4 BGP neighbor packet, use the no capture bgp-pdu neighbor ipv4address command. Parameters ipv4-address direction {both | rx | tx} Enter the IPv4 address of the target BGP neighbor. Enter the keyword direction and a direction - either rx for inbound, tx for outbound, or both. Defaults Not configured. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 7.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced. Related Commands capture bgp-pdu max-buffer-size - specifies a size for the capture buffer. show capture bgp-pdu neighbor - displays BGP packet capture information. Border Gateway Protocol 370