Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1172

To turn debugging off, use the no debug ip msdp {event peer address | packet peer address | pim} command. Parameters event peer address packet peer address pim Enter the keyword event then the peer address in a dotted decimal format (A.B.C.D.). Enter the keyword packet then the peer address in a dotted decimal format (A.B.C.D.). Enter the keyword pim to debug advertisement from PIM. Defaults Not configured. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.5(0.1) 8.3.19.0 8.3.11.1 8.3.7.0 6.2.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced ip msdp cache-rejected-sa Enable an MSDP cache for the rejected source-active entries. C9000 Series Syntax ip msdp cache-rejected-sa {number} To clear the MSDP rejected source-active entries, use the no ip msdp cache-rejected-sa {number} command then the ip msdp cache-rejected-sa {number} command. Parameters number Enter the number of rejected SA entries to cache. The range is from 0 to 32766. Defaults none Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Multicast Source Discovery Protocol (MSDP) 1172