Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 82

hostname Manually set a desired host name for the system. C9000 Series Syntax hostname name From a PE console, use hostname name to set a PE system host name. To unconfigure a hostname configured for a PE, use no hostname Parameters name Enter a text string, up to 32 characters long. Defaults Dell Networking OS Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the C9010 and C1048P. Introduced on the Z9500. Introduced on the S4820T. Changed the default from Force10 to FTOS. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. Usage Information The host name is used in the command-line prompt. To configure a desired PE console hostname, use the hostname command from a PE console. To unconfigure the hostname configured for the PE console, use no hostname. If no hostnames are configured, the system. uses the default hostname, "Dell". Example (PE Console) Dell#hostname PE1 PE1# Control and Monitoring 82