Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 321

Version 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The set local-preference command changes the LOCAL_PREF attribute for routes meeting the route map criteria. To change the LOCAL_PREF for all routes, use the bgp default localpreference command. Related Commands bgp default local-preference - changes the default LOCAL_PREF attribute for all routes. set metric To assign a new metric to redistributed routes, configure a filter. C9000 Series Syntax set metric [+ | -] metric-value To delete a setting, enter no set metric. Parameters + metric-value (OPTIONAL) Enter + to add a metric-value to the redistributed routes. (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes. Enter a number as the new metric value. The range is from zero (0) to 4294967295. Defaults Not configured. Command Modes ROUTE-MAP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Access Control Lists (ACL) 321