Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 799

To return a port to accept either tagged or untagged frames (non-hybrid), use the no portmode hybrid command. Defaults non-hybrid Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Usage Information The following describes the interface command shown in the following example. This example sets a port as hybrid, makes the port a tagged member of VLAN 20, and an untagged member of VLAN 10, which becomes the native VLAN of the port. The port now accepts: • untagged frames and classify them as VLAN 10 frames • VLAN 20 tagged frames The following describes the do show interfaces command shown in the following example. This example shows output with "Hybrid" as the newly added value for 802.1QTagged. The options for this field are: • True - port is tagged • False - port is untagged • Hybrid - port accepts both tagged and untagged frames The following describes the interface vlan command shown in the following example. This example shows unconfiguration of the hybrid port using the no portmode hybrid command. NOTE: Remove all other configurations on the port before you can remove the hybrid configuration from the port. Example Dell(conf)# interface te 2/0 Dell(conf-if-te-2/0)# portmode hybrid Dell(conf-if-te-2/0)# interface vlan 10 Dell(conf-if-vl-10)# untagged te 2/0 Dell(conf-if-vl-10)# interface vlan 20 Dell(conf-if-vl-20)# tagged te 2/0 Dell(conf-if-vl-20)# Example Dell(conf-if-vl-20)# do show interfaces switchport Name: TenGigabitEthernet 2/0 802.1QTagged: Hybrid Vlan membership: Interfaces 799