Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 441

Example Field Path Description Lists all the ASs the flapping route passed through to reach the destination network. Dell#show ip bgp flap-statistics BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0 BGP local router ID is 192.168.11.5 Status codes: s suppressed, S stale, d dampened, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r redistributed n - network, D - denied, S - stale Origin codes: i - IGP, e - EGP, ? - incomplete Network From Reuse Path h 77.0.0.0/24 172.16.0.2 d 55.0.0.0/24 172.16.0.2 200 i *> 66.0.0.0/24 172.16.0.2 200 i Dell#*>n 66.66.77.77/32 0.0.0.0 Flaps 1 3 1 0 Duration 00:00:03 00:00:25 00:00:23 32768 i 00:00:00 00:30:44 00:00:00 show ip bgp inconsistent-as View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are announced from the same neighbor AS but with a different AS-Path. C9000 Series Syntax Command Modes show ip bgp [ipv4 unicast] inconsistent-as • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information The following describes the show ip bgp inconsistent-as command shown in the following example. Border Gateway Protocol 441