Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 760

show gvrp statistics Display the GVRP configuration statistics. C9000 Series Syntax Parameters show gvrp statistics {interface interface | summary} interface interface (OPTIONAL) Enter the keyword interface then one of the interface keywords and slot/ port or number information: • For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. summary Enter the keyword summary to display just a summary of the GVRP statistics. Defaults Command Modes none • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.11.1 7.6.1.0 Description Inroduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on C-Series, E-Series, and S-Series Usage Information Invalid messages/attributes skipped can occur in the following cases: • The incoming GVRP PDU has an incorrect length. • "End of PDU" was reached before the complete attribute could be parsed. • The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type (0x01). • The attribute that was being parsed had an invalid attribute length. • The attribute that was being parsed had an invalid GARP event. • The attribute that was being parsed had an invalid VLAN ID. The valid range is from 1 to 4095. A failed registration can occur for the following reasons: • Join requests were received on a port that was blocked from learning dynamic VLANs (GVRP Blocking state). GARP VLAN Registration (GVRP) 760