Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 161

Version 7.6.1.0 7.5.1.0 E-Series Description Introduced on the S-Series. Introduced on the C-Series. Original command. traceroute View a packet's path to a specific device. C9000 Series Syntax Parameters traceroute {host | vrf instance | ip-address | ipv6-address} host vrf instance ip-address ipv6-address Enter the name of device. (Optional) E-Series Only: Enter the keyword vrf then the VRF Instance name. Enter the IP address of the device in dotted decimal format. Enter the IPv6 address, in the x:x:x:x::x format, to which you are testing connectivity. NOTE: The :: notation specifies successive hexadecimal fields of zeros. Defaults • Timeout = 5 seconds • Probe count = 3 • 30 hops max • 40 byte packet size • UDP port = 33434 Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.2.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale with IPv6. Control and Monitoring 161