Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1669

ip ssh rekey Configures the time rekey-interval or volume rekey-limit threshold at which to re-generate the SSH key during an SSH session. C9000 Series Syntax ip ssh rekey [time rekey-interval] [volume rekey-limit] To reset to the default, use no ip ssh rekey [time rekey-interval] [volume rekey-limit] command. Parameters time minutes volume rekeylimit Enter the keywords time then the amount of time in minutes. The range is from 10 to 1440 minutes. The default is 60 minutes Enter the keywords volume then the amount of volume in megabytes. The range is from 1 to 4096 to megabytes. The default is 1024 megabytes Defaults The default time is 60 minutes. The default volume is 1024 megabytes. Command Modes CONFIGURATION mode Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.5(0.1) 9.5(0.0) Description Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000, S6000, S4820T, S4810, and MXL. ip ssh rhostsfile Specify the rhost file used for host-based authorization. C9000 Series Syntax Parameters ip ssh rhostsfile {WORD} WORD Enter the rhost file name for the host-based authentication. Defaults none Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. Security 1669