Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 741

Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series. Introduced. Usage Information Executing this command without the optional ring-id command clears the statistics counters on all the available rings. The system requires a command line confirmation before the command executes. This command clears the following counters: • hello Rx and Tx counters • Topology change Rx and Tx counters • The number of state change counters Example Related Commands Dell# clear frrp Clear frrp statistics counter on all ring [confirm] yes Dell#clear frrp 4 Clear frrp statistics counter for ring 4 [confirm] yes Dell# show frrp - displays the Resilient Ring Protocol configuration. debug frrp Clear the FRRP statistics counters. C9000 Series Syntax debug frrp {event | packet | detail} [ring-id] [count number] To disable debugging, use the no debug frrp {event | packet | detail} {ring-id} [countnumber] command. Parameters event Enter the keyword event to display debug information related to ring protocol transitions. Force10 OS Resilient Ring Protocol (FRRP) 741