Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 508

prefix-list-name in out Enter the name of an established prefix list. If you do not configure the prefix list, the default is permit (to allow all routes). Enter the keyword in to distribute only inbound traffic. Enter the keyword out to distribute only outbound traffic. Defaults Not configured. Command Modes ROUTER BGPV6-ADDRESS FAMILY Command History Version Description 9.9(0.0) Introduced on the C9010. 9.2(1.0) Introduced on the Z9500. 8.2.1.0 Introduced on the E-Series ExaScale. 7.4.1.0 Introduced Usage Information Other BGP filtering commands include the neighbor filter-list and neighbor route-map commands. Related Commands • neighbor filter-list - assigns a AS-PATH list to a neighbor or peer group. • neighbor route-map - assigns a route map to a neighbor or peer group. neighbor ebgp-multihop Attempt and accept BGP connections to external peers on networks that are not directly connected. C9000 Series Syntax neighbor {ipv6-address | peer-group-name} ebgp-multihop [ttl] To disallow and disconnect connections, use the no neighbor {ipv6-address | peer-groupname} ebgp-multihop [ttl] command. Parameters ipv6-address Enter the IPv6 address in the x:x:x:x::x format. NOTE: The :: notation specifies successive hexadecimal fields of zeros. peer-group-name Enter the name of the peer group. ttl (OPTIONAL) Enter the number of hops as the time to live (ttl) value. The range is 1 to 255. The default is 255. Defaults Disabled. Command Modes ROUTER BGP Command History Version 9.9(0.0) 9.2(1.0) Description Introduced on the C9010. Introduced on the Z9500. Border Gateway Protocol 508