Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 232

show ip accounting access-list Display the IP access-lists created on the switch and the sequence of filters. C9000 Series Syntax Parameters show ip accounting {access-list access-list-name | cam_count} interface interface access-list-name Enter the name of the ACL to be displayed. cam_count List the count of the CAM rules for this ACL. interface interface Enter the keyword interface then the one of the following keywords and slot/ port or number information: • For a Port Channel interface, enter the keyword port-channel then a number. The range is from 1 to 128. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. in | out Identify whether ACL is applied on the ingress or egress side. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.5.1.0 8.3.7.0 7.6.1.0 7.5.1.0 6.2.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Added support for the 4-port 40G line cards on ExaScale. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced. Access Control Lists (ACL) 232