Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1662

• aes192-cbc • aes128-ctr • aes128-cbc • 3des-cbc Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) Description Introduced on the S6100-ON, S6000, S6000-ON, S5000, S4810, S4820T, S3048-ON, S4048-ON, MXL, C9010, S3100 series, and Z9100-ON. Usage Information • • • • • You can select one or more ciphers from the list. The default list of supported ciphers is same irrespective of whether FIPS mode is enabled or disabled. Client-supported cipher list gets preference over the server-supported cipher list in selecting the cipher for the SSH session. When the cipher (-c) option is used with the SSH CLI, it overrides the configured or default cipher list. When FIPS is enabled or disabled, the client ciphers get default configuration. ip ssh connection-rate-limit Configure the maximum number of incoming SSH connections per minute. C9000 Series Syntax Parameters ip ssh connection-rate-limit 1-10 1-10 Enter the number of maximum numbers of incoming SSH connections allowed per minute. The range is from 1 to 10 per minute. The default is 10 per minute. Defaults 10 per minute Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Security 1662