Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 183

nvram Enter the keyword nvram to reset the NvRAM only. Command Modes EXEC Privilege Command History Version 9.9(0.0) 9.2(1.0) 8.3.17.1 Description Introduced on the C9010. Introduced on the Z9500. Supported on the M I/O Aggregator. Usage Information Restoring factory defaults deletes the existing startup configuration and all persistent settings (stacking, fanout, and so forth). When restoring factory default settings, a switch remains in standalone mode after the restoration. After the restore is complete, the units power cycle immediately. CAUTION: There is no undo for this command. Example Dell#restore factory-defaults chassis clear-all * Warning - Restoring factory defaults will delete the existing * * startup-config and resets all persistent settings (stacking, * * fanout, etc.) and boot environment variables (boot config, console * * baud rate, management interface settings, etc.) * * After restoration the unit(s) will be powercycled immediately. * * Proceed with caution ! * Proceed with factory settings? Confirm [yes/no]: rmdir Remove a directory from the NFS mounted file system. C9000 Series Syntax rmdir nfsmount://mount-point/usrname Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.7(0.0) Description Introduced on the C9010 Series. Introduced this command. File Management 183