Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 679

Version 8.2.1.0 Description Introduced on the C-Series and S-Series. host For manual (rather than automatic) configurations, assign a host to a single-address pool. C9000 Series Syntax Parameters host address address/mask Enter the host IP address and subnet mask. Defaults none Command Modes DHCP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 Description Introduced in the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. ip address dhcp Configure an interface to receive its IP address from the configured DHCP server. C9000 Series Syntax ip address dhcp To release the IP address acquired from a DHCP server, enter the no ip address dhcp command. Defaults Not configured. Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. Dynamic Host Configuration Protocol (DHCP) 679