Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1111

Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 9.1.(0.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 7.5.1.0 6.2.1.1 Description Introduced on the C9010. Introduced on the Z9500. Updated to support OpenFlow. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Augmented to display PVLAN data for the C-Series and S-Series and revised the output to include the Description field to display a user-entered VLAN description. Introduced on the S-Series and revised the output to display Native VLAN. Introduced on the C-Series. Introduced on the E-Series. Usage Information The following describes the show vlan command shown in the following example. Column Heading Description (Column 1 - no heading) • asterisk symbol (*) = Default VLAN • G = GVRP VLAN • P = primary VLAN • C = community VLAN • I = isolated VLAN • O = OpenFlow NUM Status Q Displays existing VLAN IDs. Displays the word Inactive for inactive VLANs and the word Active for active VLANs. • Displays G for GVRP tagged • M for member of a VLAN-Stack VLAN • T for tagged interface • U for untagged interface • x (not capitalized x) for Dot1x untagged • X (capitalized X) for Dot1x tagged • o (not capitalized o) for OpenFlow untagged • O (capitalized O) for OpenFlow tagged • H for VSN tagged • i (not capitalized i) for Internal untagged • I (capitalized I) for Internal tagged • v (not capitalized v) for VLT untagged Layer 2 1111