Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 752

Related Commands show gvrp statistics - displays the GVRP statistics. debug gvrp Enable debugging on GVRP. C9000 Series Syntax debug gvrp {config | events | pdu} To disable debugging, use the no debug gvrp {config | events | pdu} command. Parameters config event pdu Enter the keyword config to enable debugging on the GVRP configuration. Enter the keyword event to enable debugging on the JOIN/LEAVE events. Enter the keyword pdu then one of the following Interface keywords and slot/port or number information: • For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 4096. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. Defaults Disabled. Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on C-Series, E-Series, and S-Series GARP VLAN Registration (GVRP) 752