Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1792

Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.9(0.0) Description Introduced on the C9010, Z9100-ON, S6100-ON, and S3100 series. Introduced on the S4810, S4820T, S3048-ON, S4048-ON, S5000, S6000, S6000-ON, Z9500, MXL. Usage Information If you reject the EULA, the data is not transmitted to the SupportAssist server. Related Commands • eula-consent - accept or reject the EULA. support-assist activate Enable the SupportAssist service. Syntax support-assist activate Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.9(0.0) Description Introduced on the C9010, Z9100-ON, S6100-ON, and S3100 series. Introduced on the S4810, S4820T, S3048-ON, S4048-ON, S5000, S6000, S6000-ON, Z9500, MXL. Usage Information You are guided through a series of queries to configure SupportAssist. The generated commands are added to the running configuration, including the DNS resolve commands, if configured. This command starts the configuration wizard for the SupportAssist. At any time, you can exit by entering Ctrl-C. If necessary, you can skip some data entry. support-assist activity Trigger an activity event immediately. Syntax Parameters support-assist activity {full-transfer} start now full-transfer Enter the keywords full-transfer to specify transfer of configuration, inventory, logs, and other information. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. SupportAssist 1792