Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 186

show bootvar Display the variable settings for the boot parameters. C9000 Series Syntax show bootvar Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.4 8.3.11.1 8.3.7.0 7.5.1.0 E-Series Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Output expanded to display current reload mode (normal or Jumpstart). Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series. Original command. Example Related Commands Dell#show bootvar PRIMARY IMAGE FILE = ftp://ftp:[email protected]/tftpboot/FTOSVG-1-0-0-4079.bin SECONDARY IMAGE FILE = ftp://ftp:[email protected]/tftpboot/FTOSVG-1-0-0-4046.bin DEFAULT IMAGE FILE = system://A LOCAL CONFIG FILE = variable does not exist PRIMARY HOST CONFIG FILE = variable does not exist SECONDARY HOST CONFIG FILE = variable does not exist PRIMARY NETWORK CONFIG FILE = variable does not exist SECONDARY NETWORK CONFIG FILE = variable does not exist CURRENT IMAGE FILE = ftp://ftp:[email protected]/tftpboot/FTOSVG-1-0-0-4079.bin CURRENT CONFIG FILE 1 = flash://startup-config CURRENT CONFIG FILE 2 = variable does not exist CONFIG LOAD PREFERENCE = local first BOOT INTERFACE GATEWAY IP ADDRESS = 10.11.93.254 Reload Mode = normal-reload boot system - sets the location of Dell Networking OS image files. File Management 186