Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1099

To convert the sticky MAC addresses to dynamic MAC addresses, use the no mac learning-limit command. Parameters mac-addresssticky Configures the dynamic MAC addresses as sticky on an interface. Defaults none Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.12.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Usage Information If you configure mac-learn-limit and the sticky MAC feature is enabled, dynamically learned MAC addresses are converted to sticky for that port. Any new MAC address that is learned also becomes sticky for that port. Related Commands show mac learning-limit - displays the details of the mac learning-limit. mac learning-limit station-move-violation Specify the actions for a station move violation. C9000 Series Syntax mac learning-limit station-move-violation {log | shutdown-both | shutdownoffending | shutdown-original} To disable a configuration, use the no mac learning-limit station-move-violation command, then the configured keyword. Parameters log Enter the keyword log to generate a syslog message on a station move violation. shutdown-both Enter the keyword shutdown to shut down both the original and offending interface and generate a syslog message. shutdownoffending Enter the keywords shutdown-offending to shut down the offending interface and generate a syslog message. shutdown-original Enter the keywords shutdown-original to shut down the original interface and generate a syslog message. Layer 2 1099