Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 523

Version 7.4.1.0 Description Introduced Usage Information In the software's best path selection process, the path with the highest weight value is preferred. NOTE: Reset the neighbor connection (the clear ip bgp * command) to apply the weight to the connection and recompute the best path. neighbor X:X:X::X password Enable TCP MD5 Authentication for an IPv6 BGP peer session. C9000 Series Syntax neighbor x:x:x::x password {7 | To return to the default setting, use the no neighbor x:x:x::x password command. Parameters encrypt-pass clear-pass Enter the encrypted password. Enter the clear text password. Defaults Disabled. Command Modes ROUTER BGPV6-ADDRESS FAMILY Command History Version Description 9.9(0.0) Introduced on the C9010. 9.2(1.0) Introduced on the Z9500. 8.2.1.0 Introduced Usage Information The TCP session is authentication and hence prevents the data from being compromised. network Specify the networks for the BGP process and enter them in the BGP routing table. C9000 Series Syntax network ipv6-address prefix-length [route-map map-name] To remove a network, use the no network ip-address mask [route-map map-name] command. Parameters ipv6-address prefix-length Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in the /x format. The range is /0 to /128. NOTE: The :: notation specifies successive hexadecimal fields of zeros. Border Gateway Protocol 523