Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1537

Example Version 6.1.1.1 Description Introduced on the E-Series. Dell#show qos wred-profile Wred-profile-name wred_drop wred_teng_y wred_teng_g wred_fortyg_y wred_fortyg_g wred_oneg_y_pe wred_oneg_g_pe wred_teng_y_pe wred_teng_g_pe Dell# min-threshold 0 594 594 594 594 154 154 154 154 max-threshold 0 5941 5941 5941 5941 1538 1538 1538 1538 max-drop-rate 100 100 50 50 25 100 50 50 25 threshold Specify the minimum and maximum threshold values for the configured WRED profiles. C9000 Series Syntax threshold min number max number To remove the threshold values, use the no threshold min number max number command. Parameters min number max number Enter the keyword min then the minimum threshold number for the WRED profile. The range is from 0 to 12000KB. Enter the keyword max then the maximum threshold number for the WRED profile. The range is from 0 to 12000KB. Defaults none Command Modes CONFIGURATION (config-wred) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.8.0 6.1.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. Usage Information To configure the minimum and maximum threshold values for user-defined profiles, use this command. Additionally, to modify the minimum and maximum threshold values for the pre-defined WRED profiles, Quality of Service (QoS) 1537