Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1154

Related Commands Version 7.6.1.0 Description Introduced on the C-Series and E-Series. debug lldp interface - debugs LLDP. show lldp neighbors - displays the LLDP neighbors. show running-config lldp - displays the LLDP running configuration. advertise med location-identification To advertise a location identifier, configure the system. C9000 Series Syntax advertise med location-identification {coordinate-based value | civic-based value | ecs-elin value} To return to the default, use the no advertise med location-identification {coordinatebased value | civic-based value | ecs-elin value} command. Parameters coordinate-based value civic-based value ecs-elin value Enter the keywords coordinate-based then the coordinated based location in hexadecimal value of 16 bytes. Enter the keywords civic-based then the civic based location in hexadecimal format. The range is from 6 to 255 bytes. Enter the keywords ecs-elin then the Emergency Call Service (ecs) Emergency Location Identification Number (elin) numeric location string. The range is from 10 to 25 characters. Defaults unconfigured. Command Modes CONFIGURATION (conf-lldp) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.7.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series and E-Series. Link Layer Discovery Protocol (LLDP) 1154