Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1824

Related Commands Summer time ends 02:00:00 ABC Sun Nov 1 2009 Dell# clock summer-time recurring- displays the time and date from the switch hardware clock. show ntp associations Display the NTP master and peers. C9000 Series Syntax Command Modes show ntp associations • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The following describes the show ntp associations command shown in the Example below. Field (none) Description One or more of the following symbols could be displayed: • * means synchronized to this peer. • # means almost synchronized to this peer. • + means the peer was selected for possible synchronization. • - means the peer is a candidate for selection. • ~ means the peer is statically configured. remote ref clock Displays the remote IP address of the NTP peer. Displays the IP address of the remote peer's reference clock. System Time and Date 1824