Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 73

do Allow the execution of most EXEC-level commands from all CONFIGURATION levels without returning to the EXEC level. C9000 Series Syntax Parameters do command command Enter an EXEC-level command. Defaults none Command Modes • CONFIGURATION • INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The following commands are not supported by the do command: • enable • disable • exit • config Example Dell(conf-if-te-5/0)#do clear counters Clear counters on all interfaces [confirm] Dell(conf-if-te-5/0)# Dell(conf-if-te-5/0)#do clear logging Clear logging buffer [confirm] Dell(conf-if-te-5/0)# Dell(conf-if-te-5/0)#do reload System configuration has been modified. Save? [yes/no]: n Control and Monitoring 73