Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 574

clear hardware pfc-nodrop-priority Clear the drop statistics. Syntax Parameters clear hardware pfc-nodrop-priority l2-dlf drops stack-unit stack-unit-number port-set port-pipe stack-unit stack- Enter the keywords stack-unit and the stack unit number. The range is from 0 unit-number to 5. port-set port-pipe Enter the keywords port-set and port-pipe number. The port-pipe number is 0. Command Modes EXEC EXEC Privilege Command History Version 9.10(0.0) Description Introduced on the C9010, S6000, S6000-ON, Z9100-ON and S6100-ON. Related Commands pfc-nodrop-priority l2-dlf drop - configures to drop the unknown unicast packets flooding on lossless priorities. show hardware pfc-nodrop-priority - displays the packets drop count corresponding to the priority. clear pfc counters Clear the PFC TLV counters and PFC statistics on an interface or stack unit. C9000 Series Syntax Parameters clear pfc counters [port-type slot/port | stack-unit {unit number | all } all stack-ports all}] | interface {statistics}] port-type stack-unit unit number all stack-ports all statistics Enter the keywords port-type then the slot/port information. Enter the keywords stack-unit then the stack-unit number to be cleared. Enter the keywords all stack-ports all to clear the counters on all interfaces. Enter the keyboard statistics to clear the hardware PFC counters. Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. Data Center Bridging (DCB) 574