Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 525

Command History Version 9.9(0.0) 9.2(1.0) 8.2.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the E-Series ExaScale. Introduced Usage Information Though the software does not generate a route due to backdoor config, there is an option for injecting/ sourcing a local route in presence of network backdoor config on a learned route. redistribute Redistribute routes into BGP. C9000 Series Syntax redistribute {connected | static} [route-map map-name] To disable redistribution, use the no redistribution [connected | static] [route-map mapname] command. Parameters connected static route-map mapname Enter the keyword connected to redistribute routes from physically connected interfaces. Enter the keyword static to redistribute manually configured routes. These routes are treated as incomplete routes. (OPTIONAL) Enter the keywords route-map followed by the name of an established route map. Only the following ROUTE-MAP mode commands are supported: • match ipv6 address • match ipv6 next-hop • match ipv6 route-source • set ipv6 next-hop If the route map is not configured, the default is deny (to drop all routes). Defaults Not configured. Command Modes ROUTER BGPV6-ADDRESS FAMILY Command History Version Description 9.9(0.0) Introduced on the C9010. 9.2(1.0) Introduced on the Z9500. 7.4.1.0 Introduced Usage Information If you do not configure the default-metric command in addition to the redistribute command, or there is no route map to set the metric, the metric for redistributed static and connected is "0". Border Gateway Protocol 525