Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 322

Related Commands Version 7.5.1.0 6.1.1.0 Description Introduced on the C-Series. Introduced on the E-Series. set automatic-tag - computes the tag value of the route. set level - specifies the OSPF area for route redistribution. set metric-type - specifies the route type assigned to redistributed routes. set tag - specifies the tag assigned to redistributed routes. set metric-type To assign a new route type for routes redistributed to OSPF, configure a filter. C9000 Series Syntax set metric-type {internal | external | type-1 | type-2} To delete a setting, use the no set metric-type command. Parameters internal external type-1 type-2 Enter the keyword internal to assign the Interior Gateway Protocol metric of the next hop as the route's BGP MULTI_EXIT_DES (MED) value. Enter the keyword external to assign the IS-IS external metric. Enter the keyword type-1 to assign the OSPF Type 1 metric. Enter the keyword type-2 to assign the OSPF Type 2 metric. Defaults Not configured. Command Modes ROUTE-MAP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.3.1.0 8.1.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Implemented the keyword internal. Introduced on the E-Series ExaScale. Introduced on the S-Series. Access Control Lists (ACL) 322