Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1894

show vrrp ipv6 View the IPv6 VRRP groups that are active. If no VRRP groups are active, the Dell Networking OS returns No Active VRRP group. C9000 Series Syntax Parameters show vrrp ipv6 [vrid] [interface] [brief][vrf vrf-name] vrid interface (OPTIONAL) Enter the virtual router identifier for the VRRP group to view only that group. The range is from 1 to 255. Enter the following keywords and slot/port or number information: • For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. • For a VLAN interface, enter the keyword vlan then the VLAN ID. The VLAN ID range is from 1 to 4094. brief vrf vrf-name (OPTIONAL) Enter the keyword brief to view a table of information on the VRRP groups. Enter the keyword vrf followed by the name of the VRF to view IPv6 VRRP groups corresponding to that VRF. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.8(0.0) 9.7(0.0) 9.2(1.0) 8.3.19.0 8.3.10.0 8.3.2.0 Description Introduced on the C9010. Introduced on the S3048-ON and S4048-ON. Introduced on the S6000-ON. Added support for VRF. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the E-Series TeraScale. Usage Information The following describes the show vrrp ipv6 command shown in the following example. Virtual Router Redundancy Protocol (VRRP) 1894