Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 765

Version 8.1.1.0 7.5.1.0 7.6.1.0 Description Introduced on the E-Series ExaScale. Introduced on the C-Series. Introduced on the E-Series. Usage Information The redundancy force-failover pe command forces a standby port extender unit to become a primary (or master) unit. Example Related Commands Dell#redundancy force-failover pe 255 stack-unit - Pre-provision the specified port-extender stack unit. redundancy primary Set an RPM as the primary RPM. C9000 Series Syntax redundancy primary [rpm0 | rpm1] To delete a configuration, use the no redundancy primary command. Parameters rpm0 rpm1 Enter the keyword rpm0 to set the RPM in slot R0 as the primary RPM. Enter the keyword rpm1 to set the RPM in slot R1 as the primary RPM. Default The RPM in slot R0 is the Primary RPM. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 8.3.19.0 8.3.12.0 8.1.1.0 7.5.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the S4820T. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the C-Series. Introduced on the E-Series. High Availability (HA) 765