Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1288

Related Commands Version 9.4(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Description Added support for VRF on all platforms (Except MXL and STOMP). Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. show ip ospf database - displays OSPF database information. show ip ospf database opaque-link Display the opaque-link (type 9) LSA information. C9000 Series Syntax Parameters show ip ospf [process-id| vrf vrf-name] database opaque-link [link-state-id] [adv-router ip-address] process-id vrf vrf-name link-state-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Enter the keyword vrf and the name of the VRF to view opaque-link LSA information corresponding to the OSPF process that is tied to a specific VRF. (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs adv-router ipaddress (OPTIONAL) Enter the keywords adv-router then the IP address of an Advertising Router to display only the LSA information about that router. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Open Shortest Path First (OSPFv2 and OSPFv3) 1288