Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 171

ip-address rpm0 rpm1 default primary secondary ftp: system A: | B: tftp: Enter an IP address in dotted decimal format. Enter the keyword rpm0 to specify the route processor module 0. Enter the keyword rpm1 to specify the route processor module 1. Enter the keyword default to use the default Dell Networking OS image. Enter the keyword primary to use the primary Dell Networking OS image. Enter the keyword secondary to use the secondary Dell Networking OS image. Enter the keyword FTP: to retrieve the image from an FTP server: ftp:// userid:password @host-ip/filepath. Enter A: or B: to boot one of the flash system partitions. Enter the keyword TFTP: to retrieve the image from a TFTP server: tftp://host-ip/ filepath. Defaults Not configured. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) Description Introduced on the C9010. Introduced on the Z9500. Usage Information To display these changes in the show bootvar command output, save the running configuration to the startup configuration (using the copy command) and reload the system. To specify the IP address of the default next-hop gateway for the management subnet, use the boot system gateway command. Related Command show boot system - Displays information about boot images currently stored on the system. cd Change to a different working directory. C9000 Series Syntax cd {flash: directory name/path | usbflash directory name/path} From a PE console, use cd {flash: directory name/path | usbflash directory name/ path } to change to a different working irectory. Parameters directory (OPTIONAL) Enter one of the following: • flash: (internal flash) or any sub-directory • nfsmount:///filepath: NFS-mounted path File Management 171