Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 742

packet detail ring-id count number Enter the keyword packet to display brief debug information related to control packets. Enter the keyword detail to display detailed debug information related to the entire ring protocol packets. (Optional) Enter the ring identification number. The range is from 1 to 255. Enter the keyword count then the number of debug outputs. The range is from 1 to 65534. Defaults Disabled. Command Modes CONFIGURATION (conf-frrp) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.11.1 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series. Introduced. Usage Information Because the resilient ring protocol can potentially transmit 20 packets per interface, restrict debug information. description Enter an identifying description of the ring. C9000 Series Syntax description Word To remove the ring description, use the no description [Word] command. Parameters Word Enter a description of the ring. Maximum: 255 characters. Defaults none Command Modes CONFIGURATION (conf-frrp) Force10 OS Resilient Ring Protocol (FRRP) 742