Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 211

Related Commands Version 8.3.11.1 8.4.1.0 Description Introduced on the Z9000. Introduced on the C-Series and S-Series. dot1x auth-type mab-only dot1x max-eap-req Configure the maximum number of times an extensive authentication protocol (EAP) request is transmitted before the session times out. C9000 Series Syntax dot1x max-eap-req number To return to the default, use the no dot1x max-eap-req command. Parameters number Enter the number of times an EAP request is transmitted before a session timeout. The range is from 1 to 10. The default is 2. Defaults 2 Command Modes INTERFACE ITNERFACE (BATCH MODE) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.10(0.0) 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 7.6.1.0 7.4.1.0 Description Introduced the Configuration Terminal Batch mode on C9010. Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the C-Series and S-Series. Introduced on the E-Series. 802.1X 211