Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 489

capture bgp-pdu max-buffer-size Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses. C9000 Series Syntax Parameters capture bgp-pdu max-buffer-size 100-102400000 100-102400000 Enter a size for the capture buffer. Defaults Command Modes 40960000 bytes • EXEC • EXEC Privilege Command History Version 9.9(0.0) 9.2(1.0) 8.2.1.0 7.5.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the E-Series ExaScale. Introduced Related Commands • show capture bgp-pdu neighbor - configures a route reflector and clients. • capture bgp-pdu neighbor - enables capture of an IPv4 BGP neighbor packet. capture bgp-pdu neighbor (ipv6) Enable capture of an IPv6 BGP neighbor packet. C9000 Series Syntax capture bgp-pdu neighbor ipv6-address direction {both | rx | tx} To disable capture of the IPv6 BGP neighbor packet, use the no capture bgp-pdu neighbor ipv6address command. Parameters ipv6-address direction {both | rx | tx} Enter the IPv6 address of the target BGP neighbor. Enter the keyword direction and a direction- either rx for inbound, tx for outbound, or both. Defaults Not configured. Command Modes • EXEC Border Gateway Protocol 489