Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 668

DstIp Offset: 105 Width: 32 DATA=0x7f080161 MASK=0xffffffff OuterVlanId Offset: 8 Width: 12 DATA=0x00000ffc MASK=0x00000fff action={act=CosQNew, param0=8(0x8), param1=0(0), param2=0(0), param3=0(0)} action={act=RedirectPort, param0=6(0x6), param1=0(0), param2=0(0), param3=0(0)} policer= statistics={stat id 60 slice = 0 idx=17 entries=1}{Packets} ######### FP Entry for IPC traffic destined to stack_unit 7 PE CPU####### EID 0x000003f8: gid=0xd, slice=11, slice_idx=0x8, part =0 prio=0x3f8, flags=0x10602, Installed, Enabled tcam: color_indep=1024, Stage InPorts DATA=0x0000000000000000000000000000000000000000000000c000000000000 MASK=0x0000000000000000000000000000000000000000000000dffffffffffff HiGig Offset: 320 Width: 1 DATA=0x00000000 MASK=0x00000001 DstIp Offset: 105 Width: 32 DATA=0x7f080171 MASK=0xffffffff OuterVlanId Offset: 8 Width: 12 DATA=0x00000ffc MASK=0x00000fff action={act=CosQNew, param0=8(0x8), param1=0(0), param2=0(0), param3=0(0)} action={act=RedirectPort, param0=7(0x7), param1=0(0), param2=0(0), param3=0(0)} policer= statistics={stat id 61 slice = 0 idx=18 entries=1}{Packets} tcpdump Enable a TCP dump for CPU-bound traffic on the Control and Router Processors.. C9000 Series Syntax tcpdump {cp | rp} [capture-duration time | filter expression | max-file-count value | packet-count value | snap-length value | write-to path] To disable the TCP dump, use the no tcpdump command. Parameters cp rp capture-duration Enter the keyword cp to perform a dump on traffic processed by the Control Processor CPU. Enter the keyword rp to perform a dump on traffic processed by the Route Processor CPU. Enter the time for packet capturing. The timer begins as soon as the command is enabled. The range is 20 to 9000 seconds. Debugging and Diagnostics 668