Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1522

burst-KB peak peak-rate (OPTIONAL) Enter the burst size in KB. The range is from 16 to 200000. The default is 100. (OPTIONAL) Enter the keyword peak then a number to specify the peak rate in Mbps. The range is from 0 to 40000. The default is the same as designated for committed-rate. Defaults Burst size is 100KB. peak-rate is by default the same as committed-rate. Granularity for committedrate and peak-rate is Mbps unless you use the kbps option. Command Modes QOS-POLICY-IN Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added the kbps option on the C-Series, E-Series, and S-Series. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The default burst size is 100Kb. If a different value is required, you must configure the burst size to the required value. Related Commands rate shape - shapes traffic output as part of the designated policy. qos-policy-input - creates a QoS output policy. rate-shape Shape traffic output as part of an output QoS policy. C9000 Series Syntax Parameters rate-shape {kbps | pps} peak-rate {burst-kbps | burst-packets} [committed {kbps | pps} committed-rate {burst-kbps | burst-packets}] kbps Enter the keyword kbps to specify the rate limit in kilobits per second (Kbps) in multiples of 64. The default granularity is Megabits per second (Mbps).The range is from 0 to 40000000. Quality of Service (QoS) 1522