Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 174

Version 9.7(0.1) 9.7(0.0) 9.4(0.0) 9.0.2.0 8.4.1.0 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the S3048-ON and S4048-ON. Introduced on the S6000-ON. Added the nfsmount: parameters to support remote NFS file system. Added the compressed-config parameter. Introduced on the S6000. Added IPv6 addressing support for FTP, TFTP, and SCP. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added usbflash and rpm0usbflash commands on E-Series ExaScale. Introduced on the S-Series and added the SSH port number to the SCP prompt sequence on all systems. Introduced on the C-Series. Original command. Usage Information Dell Networking OS supports a maximum of 100 files at the root directory level, on both the internal and external Flash. When copying a file to a remote location (for example, using Secure Copy [SCP]), enter only the keywords and Dell Networking OS prompts you for the rest of the information. For example, when using SCP, you can enter copy running-config scp: where running-config is the source and the target is specified in the ensuing prompts. Dell Networking OS prompts you to enter any required information, as needed for the named destination - remote destination, destination filename, user ID, password, etc. When you use the copy running-config startup-config command to copy the running configuration (the startup configuration file amended by any configuration changes made since the system was started) to the startup configuration file, Dell Networking OS creates a backup file on the internal flash of the startup configuration. Dell Networking OS supports copying the running-configuration to a TFTP server, an FTP server, or a remote NFS file system. For example: • copy running-config tftp: • copy running-config ftp: • copy running-config nfsmount:///filepath You can compress the running configuration by grouping all the VLANs and the physical interfaces with the same property. Support to store the operating configuration to the startup config in the compressed mode and to perform an image downgrade without any configuration loss are provided. Two existing exec mode CLIs, show running-config compressed and write memory compressed are enhanced to display and store the running configuration in the compressed mode. From the PE console, you can copy a file to another location using the copy flash: sourcefilename destination-filename. Similarly, you can use the copy usbflash: source-filename destination-filename command to copy a file from the external USB flash to another location. Example In the following copy scp: flash: example, SCP in the first position indicates that the target is to be specified in the ensuing prompts. Entering flash: in the second position indicates that the target is the File Management 174