Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 103
Printer Settings, Default Settings
View all Sharp MX 4501N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Printer Settings Default Settings Printer condition settings are described below. Touch the [Printer Settings] key, touch the [Default Settings] key, and configure the settings. Prohibit Notice Page Printing This setting is used to disable printing of notice pages. To enable this setting, select the checkbox and touch the [OK] key. Prohibit Test Page Printing This setting is used to disable printing of test pages. When this setting is enabled, "Printer Test Page" in the system settings cannot be used to print test pages. To enable this setting, select the checkbox and touch the [OK] key. A4/Letter Size Auto Change When printing an A4 size image, this setting allows letter size paper to be used if A4 size paper is not loaded. To enable this setting, select the checkbox and touch the [OK] key. Print Density Level This lightens or darkens the print density of color and black and white images. The print density can be adjusted to five levels. Use the keys to adjust the density level for "Color" and "B/W", and touch the [OK] key. Lower the level toward "1" for lighter exposure or raise the level toward "5" for darker exposure. Bypass Tray Settings Enable Detected Paper Size in Bypass Tray This is used to prohibit printing when the paper size specified for a print job is different from the paper size inserted in the bypass tray. To enable this setting, select the checkbox and touch the [OK] key. Enable Selected Paper Type in Bypass Tray This is used to prohibit printing when the paper type specified for a print job is different from the paper type inserted in the bypass tray. To enable this setting, select the checkbox and touch the [OK] key. Exclude Bypass-Tray from Auto Paper Select When [Auto] is selected for paper type selection, the bypass tray can be excluded from the trays that can be selected. This is recommended when special paper is often placed in the bypass tray. To enable this setting, select the checkbox and touch the [OK] key. Job Spool Queuing When this function is enabled, received print jobs are displayed in the spool queue of the job status screen. The jobs are moved to the job queue after they have been analyzed by the machine. Multiple jobs that have not yet been analyzed can appear in the spool queue. When this function is disabled, received print jobs are displayed in the job queue without being displayed in the spool queue. However, when an encrypted PDF job is printed, the job appears in the spool queue. To enable this setting, select the checkbox and touch the [OK] key. 101