Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 193

STORING A DOCUMENT ONLY (Scan to HDD) Scan to HDD is used to store the image file of a scanned document in the Main Folder or a Custom Folder. Neither printing nor transmission are performed. "Scan to HDD" SCREEN The following screen appears when the [Scan to HDD] key is touched in the base screen of document filing mode. Touch the keys described below as needed to select Scan to HDD settings. DOCUMENT FILING Scan to HDD Ready to scan to HDD. Press [Start] to scan original. (1) Mono2/Auto Color Mode (2) Job Detail Settings (3) Auto 81/2X11 Original Back (4) Special Modes (5) File Information (6) (1) [Color Mode] key Use this key to select the color mode when storing the document. ☞ ORIGINAL SETTINGS FOR "Scan to HDD" (page 19) (2) [Job Detail Settings] key Touch this key to select the exposure, resolution, and compression ratio. ☞ ORIGINAL SETTINGS FOR "Scan to HDD" (page 19) (3) [Original] key Touch this key to set the original size and select two-sided document scanning. The automatically detected original size appears in the top half of the [Original] key. ☞ Selecting the original size and two-sided document scanning (page 21) (4) [Back] key Touch this key to return to the base screen of document filing mode. (5) [Special Modes] key Select special modes for Scan to HDD, including erase, dual page scan, and card shot. ☞ Special modes screen for Scan to HDD (page 21) (6) [File Information] key Touch this key to append information to the file. The settings are configured in the same way as file information for "File". ☞ FILE INFORMATION (page 15) PERFORMING "Scan to HDD" Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 1 1 17