Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 269

Original size detector Place the original. 1 • When placing the original, orient it as explained below. Original Document feeder tray Place the originals face up. Portrait orientation* Document glass Place the original face down and align the corner with the tip of the arrow mark in the top left corner of the document glass scale. 1 1 2 1 1 Landscape orientation 1 1 * To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the placement orientation in step 5. • Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation ( ). If placed in landscape (horizontal) orientation ( ), an incorrect size will be detected. For an 5-1/2" x 8-1/2"R (A5R) size original, enter the original size manually. • Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission. Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size. Mode Switch Scan Fax Image Settings Internet Fax Send Settings USB Mem. Scan PC Scan Data Entry 3 (1) (2) Address Book Address Entry Special Modes File Quick File Change to USB memory mode. (1) Touch the [Mode Switch] key. (2) Touch the [USB Mem. Scan] key • When scanning to USB memory, there is no need to specify the destination. • If a destination of another mode has been previously specified, a message will appear when you change to USB memory mode indicating that the destination setting will be cleared. Touch the [OK] key in the message screen and go to the next step. 46