Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 431

PLACEMENT ORIENTATION OF THE ORIGINAL When an 8-1/2" x 11" (A4) original is placed in vertical orientation ( ), the image is automatically rotated 90 degrees and transmitted in horizontal orientation ( ) (Image rotation). If the original is placed in horizontal orientation ( ), it is transmitted in that orientation ( ) without being rotated. Transmission 8-1/2" x 11"(A4) Rotated to 8-1/2" x 11"R (A4R) orientation 8-1/2" x 11"R (A4R) image is transmitted. 8-1/2" x 11"R and 5-1/2" x 8-1/2" (A4R, B5 and A5) size originals cannot be rotated for transmission. System Settings for Fax (Administrator): Rotation Sending Setting (page 180) The factory default setting is rotate before transmission. If this setting is disabled, the original will be transmitted in the orientation in which it is placed. AUTOMATIC REDUCTION OF THE TRANSMITTED IMAGE If the width of the transmitted image is larger than the width of the paper in the receiving machine, the image will be automatically reduced to fit the receiving machine's paper width. Example: Reduced sizes and reduction ratios Transmitted image width Receiving machine's paper width A3 B4 11" x 17" (A3) 8-1/2" x 14", 8-1/2" x 11" (A4) B4 A4 Reduced size B4 8-1/2" x 14", 8-1/2" x 11"R (A4R) A4R 1 : 0.84 1 : 0.71 1 : 0.84 Ratio System Settings for Fax (Administrator): Auto Reduction Sending Setting (page 180) The factory default setting is automatic reduction enabled. If this setting is disabled, the image will be sent at full size and part of the image may be cut off. 15