Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 289

CHANGING THE RESOLUTION The resolution setting can be selected. Internet Fax Mode Switch Image Settings Auto Exposure 200X100dpi TIFF-F Send Settings Resolution File Format 1 Manual RX Auto 81/2x11 Special Modes Original (1) (2) Address Book Address Entry Special Modes File Quick File Display the resolution setting screen. (1) Touch the [Image Settings] key. (2) Touch the [Resolution] key. Internet Fax Resolution 2 200X100dpi 200X200dpi 200X400dpi 400X400dpi 600X600dpi OK Half Tone (1) (2) Select the resolution. (1) Touch the key of the desired resolution. (2) Touch the [OK] key. When a resolution other than [200X100dpi] is selected, the [Half Tone] key can be touched to select halftone. When the original has many gradations of light and dark such as a photo or color illustration, halftone provides a more attractive image than regular transmission. How to select the resolution For normal text originals, 200X100dpi produces an image that is sufficiently legible. For photos and illustrations, a high resolution setting (600X600dpi, etc.) or halftone setting will produce a sharp image. However, a high resolution setting or halftone setting will result in a large file, and if the file is too large, transmission may not be possible. In this event, reduce the number of pages scanned or take other measures to decrease the file size. • When using the automatic document feeder, the resolution setting cannot be changed once scanning has begun. However, when the document glass or the "Job Build" special mode is used, the resolution can be changed each time a new original or set of originals is placed. • When [TIFF-S] is selected for the format, only [200X100dpi] or [200X200dpi] can be selected. System Settings (Administrator): Initial Resolution Setting This is used to change the default resolution setting. 66