Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 781

INTERIOR (15) (16) (17) (18) (19) (20) When using the MX-3500/4500 Series (21) (22) (23) (24) (25) (26) (27) (15) Toner cartridges (21) Main power switch When the toner in a cartridge runs out, the cartridge must be replaced with a new cartridge of the same color. The shape of the toner cartridge varies slightly by model. ☞ REPLACING THE TONER CARTRIDGES (page 60) (16) Fusing area Heat is applied here to fuse the transferred image onto the paper. Caution The fusing unit is hot. Take care not to burn yourself when removing a paper misfeed. This is used to power on the machine. When using the fax or Internet fax functions, keep this switch in the "On" position. ☞ TURNING THE POWER ON AND OFF (page 13) (22) Waste toner box This collects excess toner that remains after copying and printing. Your service technician will collect the waste toner box. (23) Waste toner box release button (17) Transfer belt During full color copying, the toner images of each of the four colors on each of the photoconductive drums are combined together on the transfer belt. During black and white copying, only the black toner image is transferred onto the transfer belt. Do not touch or damage the transfer belt. This may cause a defective image. (18) Right side cover Open this cover to operate the fusing area pressure adjustment lever and to remove a misfeed. ☞ Fusing unit pressure adjusting levers (page 32) (19) Paper reversing section cover This is used when 2-sided copying and printing is performed. Open this cover to remove a paper misfeed. Press this button when you need to release the waste toner box lock to replace the waste toner box or clean the laser unit. ☞ CLEANING THE LASER UNIT (page 56) ☞ REPLACING THE WASTE TONER BOX (page 63) (24) Handle Pull this out and grasp it when moving the machine. (25) Right cover of stand/1 x 500 sheet paper drawer Right cover of stand/2 x 500 sheet paper drawer (when a stand/1 x 500 sheet paper drawer or a stand/2 x 500 sheet paper drawer is installed) Open this to remove a paper misfeed in tray 3 or tray 4. (26) Paper tray right side cover Open this to remove a paper misfeed in tray 1 or tray 2. (20) Bypass tray Use this tray to feed paper manually. When loading paper larger than 8-1/2" x 11"R or A4R, be sure to pull out the bypass tray extension. ☞ LOADING PAPER IN THE BYPASS TRAY (page 28) (27) Right side cover release lever To remove a paper jam, pull and hold this knob up to open the right side cover. 6