Sharp MX 4501N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 278

SPECIFYING THE SCAN SIZE OF THE ORIGINAL If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original size manually. Place the original in the document feeder tray or on the document glass and follow the steps below. Specifying the size using paper sizes USB Mem. Scan Mode Switch Image Settings Auto Exposure 200X200dpi Mono2/Auto Color Mode PDF/PDF File Name Resolution File Format 1 Auto 81/2x11 Special Modes Original (1) (2) Special Modes Display the original settings screen. (1) Touch the [Image Settings] key. (2) Touch the [Original] key. The automatically detected size appears at the top of the [Original] key. USB Mem. Scan Original Scan Size Auto 81/2x11 100% Send Size Auto OK Touch the [Scan Size] key. 2 2-Sided Booklet Image Orientation 2-Sided Tablet USB Mem. Scan AB Inch OK Original Auto 51/2x81/2 81/2x11R 11x17 Manual 51/2x81/2R 81/2x13(216x330) Manual 81/2x11 81/2x14 Long Size Standard Size Size Input 3 (1) (2) Specify the scan size. (1) Touch the appropriate original size key. (2) Touch the [OK] key. • If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long original. The maximum length that can be scanned is 31-1/2" (800 mm) (the maximum width is 11-5/8" (297 mm)). • To specify an AB size for the scan size, touch the [AB Inch] key to highlight the [AB] side and then specify the scan size. USB Mem. Scan Original Scan Size 51/2x81/2 100% Send Size Auto OK Touch the [OK] key. 4 2-Sided Booklet Image Orientation 2-Sided Tablet When [Long Size] is selected, the two-sided scanning setting and send size cannot be changed. In addition, scanning will take place in Mono 2 mode. 55